Frequently asked questions
- Two drums are connected to each other via a closed heating circuit. This ensures that the drum temperature in both drums is always identical.
- The temperatures can be set separately for each heating circuit in the range between 20 and 80 °C.
The structure of the Dosemat SD
This Dosemat consists of an outer casing and a one-piece inner casing.
The inner jacket is perforated across the entire width.
Behind it are scoop pockets and channels that transport the liquor via the center of the axle to a mixing vessel and from there back into the drum.
Chemicals are added here and distributed evenly throughout the drum within a few seconds.
It is also possible to connect measuring devices to record all important parameters.
The structure of the Dosemat DM
The Dosemat DM has bearings on both sides.
The drum consists of an outer shell and has two inner shells that act as scooping pockets.
The liquor passes through these via four channels to the middle of the drum, into the mixing chamber and back into the drum. Chemicals are added to the mixing chamber and distributed evenly throughout the drum within a few seconds. Measuring devices for recording all important parameters can also be connected here. The drum has a large sliding lid that can be built pneumatically or with a counterweight.
Add all the components you need to automate your tannery to the Dosemat DD.
In proven Dose quality, of course.
- iPControl system: control and monitoring of the entire production process
- Dosemix: The water mixing and dosing system ensures precise addition of water and chemicals.
- Chemdos system: Automatic dosing of up to 30 liquid components.
- Humidification system: With humidity control and mist nozzle
- Dust extraction system: With cyclone unit and air circulation
- Insulation: Allows the temperature to be raised to approx. 45 °C
- Automation: Integration with existing automation systems such as Chemdos and Dosemix
- Recipe and process management: Compatible with WebControl
- Integrated recipe and process management
- Chemical container with automatic dosing
- pH value measurement
- Water mixing and dosing system
- CE protective device
- Signal lamp
- Additional preparation containers
The Dosemat is similar to a large washing machine.
The larger the load, the more likely it is to become unbalanced when spinning.
The three-part drum reduces the risk of the load becoming concentrated and the spinning becoming uneven.
This allows 60 % more raw material to be fed into the machine.
More raw material means more production in the same time and in the same space in the tannery.
A great advantage where time and space are usually in short supply.
